Msa Hard Hat Suspension

Msa Hard Hat Suspension

A hard hat is a type of helmet worn by construction workers, industrial workers, and miners to protect the head from falling objects, electrical shock, and concussions. The suspension is the part of the hard hat that sits on the head and provides cushioning and support. It is usually made of plastic or nylon and has a comfortable fit.

How often do you replace hard hat suspension?

There is no definitive answer to how often you should replace the suspension on your hard hat. However, it is generally recommended that you replace the suspension on your hard hat at least once a year. Additionally, if you notice any cracks or damage to the suspension, you should replace it immediately.

How do I make my MSA Hard Hat sit lower?

There are a few ways to make an MSA hard hat sit lower on your head, depending on your preference and the type of hat you have. One way is to adjust the suspension so that the hat sits lower on your head. Another way is to wear a smaller size hat. If you have a ratchet-type suspension, you can also loosen the band so that the hat sits lower on your head. Finally, some hard hats come with an adjustable headband that can be moved up or down to make the hat sit lower or higher on your head.

What does MSA mean on a hard hat?

MSA is an abbreviation for “minimal surface area.” This refers to the amount of contact between the helmet and the head, which is important for comfort and safety. The MSA rating is determined by measuring the area of the helmet that comes into contact with the head, and is expressed in square inches. The lower the number, the better the fit and comfort of the helmet.

How do you fix a hard hat suspension?

  1. Inspect the suspension for any cracks or damage. If you see any damage, replace the suspension immediately.
  2. If the suspension is in good condition, but not properly fitting your head, you may need to adjust the size. Most suspensions have an adjustable knob in the back that can be turned to loosen or tighten the fit.
  3. If the suspension is properly fitting your head, but still not absorbing shocks properly, you may need to replace the shock-absorbent liner. These are usually made of a soft material like foam and can be found at most hardware stores.
  4. If you still can’t get the suspension to work properly, you may need to replace the entire hard hat.
See Also  Blue Hard Hat

Do hard hat suspensions expire?

Yes, hard hat suspensions do expire. The length of the suspension varies depending on the severity of the infraction, but is typically around six months. After the suspension expires, the hard hat must be re-inspected by a qualified individual to ensure that it is still in good condition and able to protect the wearer from potential hazards.

Can I wear my MSA hard hat backwards?

Yes, you can wear your MSA hard hat backwards, but there are a few things to keep in mind. First, make sure that the brim is facing the correct way so that it will protect your face from debris. Second, adjust the straps so that they are comfortable and secure. Third, be aware that wearing your hard hat backwards may impede your hearing, so take extra caution when working in loud environments.

How do I adjust my MSA hard hat?

There are a few things you need to do in order to adjust your MSA hard hat. First, you need to find the adjusting knob on the back of the hat. Second, you need to loosen the knob until the hat is comfortable. Third, you need to retighten the knob so the hat is secure.

How high should a hard hat sit?

A hard hat should sit level on the head, and the brim should extend evenly all the way around. The front of the hard hat should come down to the brow, and the back should come down to the base of the skull. The straps should be snug but not too tight, and the hard hat should not be able to move around on the head.

See Also  Hard Hat Sun Shade

Does OSHA allow stickers on hardhats?

There are no specific OSHA regulations regarding stickers on hardhats. However, the agency does have guidelines for hardhat stickers in its Personal Protective Equipment standards. OSHA recommends that stickers on hardhats be made of durable material that is resistant to tearing, abrasion, and fading. The agency also recommends that stickers be placed on hardhats in a way that does not obstruct the wearer’s vision or impede the proper functioning of the hardhat.

How do I know when my MSA safety helmet expires?

Most MSA safety helmets have a five-year expiration date from the date of manufacture. However, some models have a ten-year expiration date. You can find the expiration date on the sticker that is affixed to the back of the helmet.

If you are unsure of the expiration date of your helmet, you can contact MSA customer service for assistance. It is important to always wear a safety helmet that is in compliance with current safety standards. Wearing an expired helmet could put you at risk for serious injury or death in the event of an accident.

It is important to always wear a safety helmet that is in compliance with current safety standards. Wearing an expired helmet could put you at risk for serious injury or death in the event of an accident.

What are the 3 classes of hard hats?

There are three classes of hard hats: Class A, Class B, and Class C. Class A hard hats are made of aluminum and are used in construction work. Class B hard hats are made of fiberglass and are used in industries such as mining and logging. Class C hard hats are made of plastic and are used in food service and healthcare.


Msa hard hat suspension is a great product that can help protect your head from injury. It is comfortable to wear and easy to adjust. It is also lightweight and durable.