How To Change The Code On A Kwikset Lock

How To Change The Code On A Kwikset Lock

  1. Locate the Kwikset lock you need to change the code on. There will be a small slot on the side of the lock, above the keyhole.
  2. Insert a small, flat-head screwdriver or other tool into the slot and turn it clockwise until you hear a click.
  3. Remove the screwdriver and hold down the button on the inside of the lock that is exposed.
  4. Enter your new code by depressing the buttons in the order that you wish the code to be. For example, if your new code is “1234”, you would press the button twice, then press the next button three times, then press the fourth button four times.
  5. Release the button and test your new code by depressing the buttons in the order you just entered. The lock should click and the latch should retract.

How do I reset my Kwikset door code?

  1. If you need to reset your Kwikset door code, the first thing you’ll need to do is locate the reset button. This button is usually located on the back of the door handle or on the inside of the door panel.
  2. Once you’ve located the reset button, press and hold it for a few seconds. You should hear a click or a beep, indicating that the reset is complete.
  3. If you have a keypad model, you’ll need to enter your new code twice to confirm it. Once you’ve done that, your new code should be active.
  4. If you have any questions or problems, please feel free to contact Kwikset customer service for assistance.
See Also  How To Pick A Lock With A Credit Card

How do I change my door lock code?

  1. First, you will need to find the door lock code. This can be found in the owner’s manual or on the door lock itself.
  2. Once you have found the door lock code, you will need to enter it into the door lock.
  3. After you have entered the door lock code, you will need to press the “Lock” button.
  4. Finally, you will need to test the new door lock code to make sure it works.

How do you reprogram a Kwikset Smart lock?

There are a few different ways that you can reprogram a Kwikset Smart lock. One way is to use the Kwikset app. Another way is to use the Smart Key Tool. And the last way is to use the Kwikset Website.

How do you change the 4 digit code on a keypad lock?

  1. Find the 4 digit code on the keypad lock.
  2. Enter the 4 digit code on the keypad.
  3. Press the “change” or “enter” button.
  4. Enter the new 4 digit code on the keypad.
  5. Press the “change” or “enter” button.

Why is my Kwikset lock not pairing?

There are a few reasons that your Kwikset lock might not be pairing. The most common reason is that the batteries are low and need to be replaced. Another reason might be that the locking mechanism is dirty and needs to be cleaned. Lastly, there might be a problem with the locking mechanism itself and it will need to be replaced.

What is the Kwikset button?

The Kwikset button is a physical button located on the interior surface of a door that, when pushed, activates the locking mechanism. This button is typically used in conjunction with a keyed deadbolt lock to provide an extra layer of security.

See Also  Why Is My Lock Screen Dark

What is the master code for Kwikset?

The master code for a Kwikset lock is the code that is used to unlock the door when the primary code is forgotten. This code is usually set by the manufacturer and is not known to the general public.

How do you program a Z-wave Kwikset?

  1. Mount the Z-wave controller near the Kwikset.
  2. Power on the Z-wave controller.
  3. Put the Z-wave controller into inclusion mode.
  4. Press the button on the Kwikset that you want to include into the system.
  5. The Kwikset should now be successfully included into the system.

How do I reset my electronic Kwikset?

  1. Remove the battery cover and batteries from the deadbolt.
  2. Press and hold the Program button (the button with the key icon) for 20 seconds.
  3. Re-insert the batteries and replace the battery cover.
  4. The deadbolt should now be reset and you can reprogram it as desired.

How do you reset a Z wave Kwikset lock?

To reset a Z wave Kwikset lock, you will need to first put the lock into discovery mode by pressing and holding the reset button for 5 seconds. Once the light on the lock begins to blink, you will then need to use your Z wave controller to include the lock into your Z wave network. Once the lock has been successfully added, you will then need to perform a factory reset by pressing and holding the reset button for 10 seconds.

How do you change the code on a Kwikset lock 955?

  1. Start by removing the battery cover on the back of the lock.
  2. With a small screwdriver or other tool, remove the battery retainer clip.
  3. Take out the old batteries and insert new ones, making sure they are oriented correctly.
  4. Put the battery retainer clip back in place and replace the battery cover.
  5. On the face of the lock, locate the code change lever (it will be labeled).
  6. Using a small screwdriver or other tool, move the lever to the up position.
  7. Enter your new code on the keypad and press the “Enter” button.
  8. Move the code change lever back to the down position.

Conclusion

If you need to change the code on your Kwikset lock, it’s easy to do. Just follow the steps in this blog post and you’ll be able to do it in no time.